How to achieve a smooth cabinet painted finish

source: pinterest.com

Do it yourself homeowners need to consider a few things when trying to achieve a beautiful, finished cabinet painting project. Properly sanding cabinets and doors is essential. Cabinet painting can be a complex process. If you are looking to tackle these kinds of projects yourself, then this article will help you to prepare for the job.

It’s not like painting your walls or doors. It is important to follow a process. First, remove all hardware. Next, clean and fill all holes and grains in your cabinets. It is possible to do everything perfectly, but if you don’t fill any holes or grains, it can be very dangerous.

This article will discuss how to achieve a smooth finish on your cabinets. You will need to choose the right grit of sandpaper depending on whether you are using oak cabinets or redwood cabinets. Two grits homeowners should have on hand are 150 grit and 220-grit.

A coarser grit than 150 will cause wood to become brittle. If you have really severe scratches, you’ll need to fill the gaps and begin the process again. You should never use sandpaper below 150 grit. People will recommend 120 grit sandpaper for cabinet painting projects. This is not correct.

Start by sanding with 150 grit sandpaper. This is what will penetrate any sealer or paint on your cabinets. It will also give your primer something to bond to. You don’t have to sand down to the wood when painting cabinets. If you’re staining cabinets with a new or fresh color, sanding down to wood is not necessary.

Many people believe that to paint cabinets, you must sand them down to the wood. This is not true. You should also sand your cabinets to remove any glossy sealer on them. The glossy sealer is designed to repel grease, oil, dirt, and paint. After you have finished sanding cabinets, make sure they are dull and free from scratches.

Now that you have removed the first layer of cabinet protection, it is time to clean up any dust. You will notice a sandpaper-like finish to your cabinets if there is any remaining dust. Once you are satisfied that all sanding dust has been removed, wipe your cabinets down with a damp cloth. Allow the cabinets to dry completely before wiping them down with a towel or damp rag.

You are now ready to prime your cabinets. Depending on which primer you used, it will take between 4 and 24 hours for your primer to dry properly. You can now put away your 150-grit sandpaper. After your cabinets have been primed, you’ll need your finer or 220-grit Sandpaper. Primer can have a texture all its own so sand the cabinets smooth. The primer will be lightly sanded. You won’t be able to sand your cabinets too hard.

Continue the dust extraction process. To remove dust, use microfiber cloths. Next, wipe off any remaining dust with damp rags. Next, you will need to paint your cabinets using the premium paint. Allow the paint to dry completely before sanding your cabinets. Paint should be applied at least 2 coats.